Find a Service Center
Alternate Products
- 3 7/16" Shaft
- 3 3/4" Base to Center
- Springlok™ Collar
- 10 13/16" to 11 3/16" Bolt Spacing
- Heavy-Duty
description
- Dodge Type E, industry-trusted and proven since 1943, is manufactured in Marion, NC. The US-manufactured, high-capacity mounted tapered roller bearing offers longer bearing life at a reliable and lower TCO.
applications
- Load out
- Aggregate
- Conveyors
- Cement
features
- (Optional) field-adaptable "XTS Plus", E-Tect seal kit for longer life in wet or very dusty environments
- Shaft ready, factory-lubed sealed and adjusted
- Simple set screw mount with dual 65° Spring-lok collars
- Case-hardened rollers and races
- Dual XTS nitrile rubber, triple-lip seals
- Housings optimized for (optional) Dodge OPTIFY™ sensor for bluetooth-enabled condition monitoring
| Base Width | 3 1/2 in |
| Bolt Hole Spacing Range [Max] | 11 3/16 in |
| Lock Washer | N/A |
| Bolt Holes | 2 |
| Bolt Hole Spacing | 11 in |
| Shaft Dia. | 3 7/16 in |
| Housing Material | Cast Iron |
| Pillow Block Type | Thru-Bolt |
| Inch/Metric | Inch |
| Center Line to Base Dimension [Min] | 3 3/4 in |
| Mounted Unit Duty | Heavy-Duty |
| Stabilizing Ring | N/A |
| Seal Type | Contact Seals |
| Length Through Bore | 5 in |
| Bolt Hole Length | 1 3/16 in |
| Insert Type | Steel Insert |
| Adapter Assembly | N/A |
| Bolt Hole Size | 1 3/16 in |
| Bolt Size | 7/8 in |
| Lubrication | Relubricatable |
| End Type | Open End |
| Bearing Design | Non-Expansion |
| Base Height | 2 1/4 in |
| Housing Construction | 1 Piece |
| Housing Height | 7 1/2 in |
| Locking Device | Dual Spring-lok Collar |
| Lock Nut | N/A |
| Collar O.D. | 5 17/32 in |
| Bolt Hole Spacing Range [Min] | 10 13/16 in |
| Bearing Type | Tapered Roller Bearing |
| Triple Seal | N/A |
| Base Length | 14 in |
| Weight | 44.57 LB |
| EAN or UPC | 782475699070 |
