Mechanically retained triple-lip seal with stainless steel flinger
Inner and outer rings are precision hardened and honed for wear resistance and quiet operation
Patented Maxlife cage is made from a high temperature polymer material, and its one-of-a-kind, compartmentalized design ensures that grease pockets are maintained around the balls, leading to less likelihood for grease washout and cooler operating temperatures
Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or location pins
65° set screw spacing offers an optimum balance between locking force and inner ring stress
Open and closed safety covers available
Center of Bearing to Back of Inner Ring
1/2 in
Housing Height
3 57/64 in
Insert Type
Corrosion-Resistant Insert
Temperature Range [Max]
225 °F
Base Length
6 35/64 in
Collar O.D.
1 27/32 in
Outer Ring Size
207
Bolt Hole Spacing
4 31/32 in
Inch/Metric
Inch
Bolt Hole Spacing Range [Min]
4 13/16 in
Bolt Hole Length
23/32 in
Static Load Rating [Max]
3,065.00 lbf
Base Width
1 7/8 in
Lubrication
Relubricatable
Bolt Size
1/2 in
Mounted Unit Duty
Corrosion Resistant-Duty
Shaft Dia.
1 7/16 in
Bearing Type
Ball Bearing
Housing Construction
1 Piece
Series
P2BSCEZ
Center of Bearing to Front of Inner Ring
1 1/32 in
Housing Material
Polymer
Seal Type
PROGUARD™ Plus Contact Seals w/Flingers
Pillow Block Type
Thru-Bolt
Bolt Holes
2
Center Line to Base Dimension [Min]
1 7/8 in
Base Height
23/32 in
Dynamic Load Rating
5,759.00 lbf
Length Through Bore
1 17/32 in
End Type
Open End
Bolt Hole Spacing Range [Max]
5 1/8 in
Misalignment Range
±2°
Locking Device
Setscrew Locking Collar
Bearing Design
Non-Expansion
Weight
1.72 LB
EAN or UPC
782475986057
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
