Find a Service Center
- 5 mm Belt Pitch
- 25 mm Belt Width, 52 Teeth
- 3.213" Outside Diameter
- JA Bushing Required
- w/a Bore Range of 1/2" to 1 1/4"
applications
- Agitators
- Mixers
- Brick and clay machinery
- Compressors
- Conveyors
- Blowers
- Laundry machinery
- Machine tools
- Paper machinery
features
- Quiet operation
- Compact
- Positive drive, no slip
- No lubrication required
- Nonstretch
- Corrosion-resistant
- Abrasion-resistant
- Virtually no backlash
- Clean operation
- Low maintenance
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Outside Dia. | 3.213 in |
| Bushing Series | JA |
| Bore Range [Max] | 1.25 in |
| Bushing Type | QD |
| Finished Bore | N/A |
| No. of Teeth | 52 |
| Sprocket Width | N/A |
| Belt Width | 25 mm |
| Bore Range [Min] | 0.5 in |
| Type | B1F |
| Belt Pitch | 5 mm |
| Pitch Diameter | 3.258 in |
| Bore Type | Taper-Lock and QD Bushed |
| Weight | 1.4 LB |
| EAN or UPC | 782475744695 |
