Find a Service Center
- 3/8" Pitch
- L Belt Type
- 1" Belt Width
- 20 Teeth
- 2.387" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
| Hub Projection | 0.06 in |
| Bore Range [Min] | 0.5 in |
| Hub Dia. | N/A |
| Bushing Type | Taperlock |
| Belt Pitch | 0.375 in |
| Outside Dia. | 2.357 in |
| Bore Range [Max] | 1.125 in |
| Bore Type | Taper-Lock and QD Bushed |
| Length Through Bore | 0.87 in |
| Pitch Diameter | 2.387 in |
| No. of Teeth | 20 |
| Belt Width | 1 in |
| Finished Bore | N/A |
| Type | KF-1 |
| Belt Size | L |
| Bushing Series | 1108 |
| Weight | 0.79 LB |
| EAN or UPC | 782475576401 |
