Find a Service Center
- 7/8" Pitch
- XH Belt Type
- 2" Belt Width
- 26 Teeth
- 7.241" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Length Through Bore | 2 in |
| Bushing Series | 3020 |
| Belt Size | XH |
| Bushing Type | Taperlock |
| Bore Range [Min] | 0.875 in |
| Bore Type | Taper-Lock and QD Bushed |
| Finished Bore | N/A |
| Belt Width | 2 in |
| Belt Pitch | 0.875 in |
| Hub Projection | 0.56 in |
| Outside Dia. | 7.131 in |
| No. of Teeth | 26 |
| Bore Range [Max] | 3 in |
| Pitch Diameter | 7.241 in |
| Hub Dia. | N/A |
| Type | KF-1 |
| Weight | 18.5 LB |
| EAN or UPC | 782475088874 |
