Find a Service Center
- 1/2" Pitch
- H Belt Type
- 3" Belt Width
- 60 Teeth
- 9.549" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
| Type | A-2 |
| Hub Dia. | 0 in |
| No. of Teeth | 60 |
| Belt Size | H |
| Belt Width | 3 in |
| Outside Dia. | 9.495 in |
| Finished Bore | N/A |
| Bushing Type | Taperlock |
| Bore Type | Taper-Lock and QD Bushed |
| Pitch Diameter | 9.549 in |
| Bore Range [Min] | 0.875 in |
| Belt Pitch | 0.5 in |
| Bore Range [Max] | 3 in |
| Bushing Series | 3020 |
| Length Through Bore | 2 in |
| Hub Projection | 0.69 in |
| Weight | 28.0 LB |
| EAN or UPC | 782475088829 |
