Find a Service Center
- 1/2" Pitch
- H Belt Type
- 3" Belt Width
- 72 Teeth
- 11.459" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Belt Pitch | 0.5 in |
| Bore Range [Min] | 0.875 in |
| Length Through Bore | 2 in |
| Belt Size | H |
| Hub Projection | 0.31 in |
| Bore Range [Max] | 3 in |
| Belt Width | 3 in |
| Bushing Series | 3020 |
| Bore Type | Taper-Lock and QD Bushed |
| Finished Bore | N/A |
| Type | A-2 |
| No. of Teeth | 72 |
| Pitch Diameter | 11.459 in |
| Bushing Type | Taperlock |
| Hub Dia. | 0 in |
| Outside Dia. | 11.405 in |
| Weight | 40.5 LB |
| EAN or UPC | 782475576876 |
