Find a Service Center
- 3/8" Pitch
- L Belt Type
- 1/2" Belt Width
- 84 Teeth
- 10.027" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
| Bore Range [Max] | 2.5 in |
| Finished Bore | N/A |
| Bore Type | Taper-Lock and QD Bushed |
| Belt Size | L |
| Length Through Bore | 1.75 in |
| Hub Projection | 1/2 in |
| Bushing Type | Taperlock |
| Hub Dia. | 4.38 in |
| Belt Width | 0.5 in |
| Bore Range [Min] | 0.5 in |
| Bushing Series | 2517 |
| No. of Teeth | 84 |
| Pitch Diameter | 10.027 in |
| Type | C-2 |
| Belt Pitch | 0.375 in |
| Outside Dia. | 9.997 in |
| Weight | 16.83 LB |
| EAN or UPC | 782475576371 |
