RAC-304

RAC Series Single-Acting Aluminum Cylinder

Item #100189792

9.09" Retracted Height

+ Show More

Auto Replenish

each One-time purchase

Product Details

Composite bearings prevent metal-to-metal contact, increasing cylinder life and resistance to side loads of up to 10%
Hard coat finish on all surfaces
Steel base plate and saddle for protection against load-induced damage
Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
High strength return spring for rapid cylinder retraction
CR-400 coupler and dustcap included on all models

Specifications

Operating Pressure [Max]	10000 psi, 700 bar
Plunger Diameter	2.36 in, 60 mm
Retracted Height	9.09 in
Single/Double-Acting	Single Acting
Collapsed Height	9.09 in, 231 mm
Outside Dia.	3.94 in
Cylinder Effective Area	6.85 in2
Maximum Operating Pressure	10000 psi
Oil Capacity - Advance	26.99 in3, 442 cm3
Cylinder Effective Area - Advance	6.85 in2, 44.2 cm2
Series	RAC
Oil Capacity	26.97 in3
Cylinder Capacity	30 tons
Collapsed Height [Max]	9.99 in, 254 mm
Saddle Tilt Angle [Max]	5 degrees
Surface Treatment	Anodized
Base Mounting Holes Thread Depth	12 mm
O.D.	3.94 in, 100 mm
Stroke	3.94 in, 100 mm
Optional Tilt Saddle Diameter	2.17 in
Coupler Used	CR400 Coupler
Plunger Type	Solid
Optional Tilt Saddle Addition To Collapsed Height	0.43 in, 11 mm
Standard	ASME B-30.1, ISO 10100
Return Type	Single-Acting, Spring Return
Base Mounting Holes Bolt Circle	3.15 in, 80 mm
Collapsed Height [Min]	5 in, 128 mm
Saddle Diameter	1.61 in, 55 mm
Saddle Protrusion From Plunger	0.12 in
Cylinder Class	30 Ton
Extended Height	13.04 in, 331 mm
Base Mounting Holes Thread	M6
Material	Aluminum
Base To Advance Port	1.31 in, 32 mm
Cylinder Capacity Advance [MAX]	309 kN
Cylinder Bore Diameter	2.95 in, 75 mm
Weight	13.6 LB
EAN or UPC	662005125746