Find a Service Center
- 100 ton Capacity
- 5.91" Stroke
- Double Acting Aluminum Cylinder
features
- Double-acting for rapid retraction, regardless of hose lengths and system losses
- Composite bearings prevent metal-to-metal contact, increasing cylinder life and resistance to side loads of up to 10%
- Hard coat finish on all surfaces resists damage and extends cylinder life
- Handles standard on 50, 100, and 150 ton models
- Steel base plate and saddle for protection against load-induced damage
- Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
- Built-in safety valve prevents accidental over-pressurization
- CR-400 coupler and dust cap standard
- All RAR cylinders are equipped with bolt-on, removable, hardened steel saddles
compliances
- All cylinders meet ASME B-30.1 and ISO 10100 standards
caution
- The mounting holes in these aluminum cylinders are designed for fixturing the steel base plate
- they will not withstand the capacity of the cylinder
| Cylinder Effective Area - Push | 22.19 in2 |
| Operating Pressure [Max] | 10000 psi, 700 bar |
| Single/Double-Acting | Double Acting |
| Cylinder Capacity - Pull | 62 tons |
| Series | RAR |
| Outside Dia. | 7.28 in |
| Collapsed Height | 13.83 in, 351 mm |
| Cylinder Capacity - Push | 111 tons |
| Cylinder Effective Area - Advance | 22.19 in2, 143.1 cm2 |
| Plunger Diameter | 3.54 in, 90 mm |
| Oil Capacity - Retract | 72.87 in3, 1193 cm3 |
| Retracted Height | 13.82 in |
| Oil Capacity - Advance | 131.14 in3, 2147 cm3 |
| Cylinder Effective Area - Retract | 12.33 in2, 79.5 cm2 |
| Cylinder Effective Area - Pull | 12.33 in2 |
| Oil Capacity - Pull | 72.79 in3 |
| Cylinder Capacity | 100 tons |
| Oil Capacity - Push | 131.02 in3 |
| Maximum Operating Pressure | 10000 psi |
| Surface Treatment | Anodized |
| Saddle Protrusion From Plunger | 0.12 in, 29 mm |
| Optional Tilt Saddle Diameter | 2.8 in |
| Standard | All cylinders meet ASME B-30.1 and ISO 10100 standards |
| Return Type | Double-Acting, Hydraulic Return |
| Optional Tilt Saddle Addition To Collapsed Height | 0.39 in, 10 mm |
| Base Mounting Holes Bolt Circle | 165 mm |
| Plunger Type | Solid |
| Extended Height | 19.73 in, 501 mm |
| Collapsed Height [Max] | 14.99 in, 381 mm |
| Base To Advance Port | 1.7 in, 43 mm |
| Coupler Used | CR400 Coupler |
| Cylinder Class | 100 Ton |
| Saddle Tilt Angle [Max] | 5 degrees |
| Cylinder Capacity Advance [MAX] | 1002 kN |
| Material | Aluminum |
| Cylinder Bore Diameter | 5.32 in, 135 mm |
| Saddle Diameter | 2.95 in, 71 mm |
| Top To Retract Port | 3.15 in, 80 mm |
| Base Mounting Holes Thread | M6 |
| Base Mounting Holes Thread Depth | 12 mm |
| Stroke | 5.91 in, 150 mm |
| O.D. | 7.28 in, 185 mm |
| Collapsed Height [Min] | 10 in, 255 mm |
| Weight | 56.9 LB |
| EAN or UPC | 662005125876 |
