Find a Service Center
- 0.67 in Inner Diameter
- 1.18 in Outer Diameter
- 0.08 in Overall Width
features
- Best used for high axial loads that require a thin cross section
- Hardened steel cage is standard, polymer cage has a .TN suffix
- Available in inch (NTA) and metric (FNT, FNTA, AXK) sizes
- Best used with the proper thrust washers (inch-TRA, TRB, etc and metric-AS, GS, WS, LS)
| Contact O.D. | 29 mm |
| Contact I.D. | 19 mm |
| I.D. | 17 mm |
| Bearing Design | Cage & Roller Assembly |
| Dynamic Load Rating | 2.01 lbf |
| Self Aligning | No |
| No. of Rows | 1 |
| End Type | Open End |
| Cage Material | Steel |
| Radial Internal Clearance | N/A |
| Matching Assembly | AS1730, LS1730 |
| Tolerance | Iso Class 0 (RBEC 1) |
| Diameter to Clear Assembly O.D. | 31 in |
| Bore Type | Round Bore, Metric Type |
| Enclosure | Open |
| Capacity | Standard Capacity |
| Oil Hole | w/o Oil Hole |
| Origin | Needle Roller & Cage |
| Radial Internal Clearance Specification | N/A |
| O.D. | 30 mm |
| Static Load Rating [Max] | 6.92 lbf |
| Precision Ground | Yes |
| Weight | 0.002 LB |
| EAN or UPC | 605790253720 |
