Find a Service Center
- 0.25 in Inner Diameter
- 0.44 in Outer Diameter
- 0.5 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Self Aligning | No |
| Series | RC |
| Relubrication Feature | No |
| Cage Type | Window |
| I.D. | 1/4 in |
| Bore Type | Round Bore, Inch Type |
| O.D. Type | Straight |
| Outer Ring Width | 0.5 in, 12.7 mm |
| Speed (Max) Oil | 20000 rpm |
| Component | Assembly |
| No. of Rows | 1 |
| Capacity | Standard Capacity |
| Radial Internal Clearance | N/A |
| Radial Internal Clearance Specification | N/A |
| Relubricatable | No |
| Overall Width | 0.5 in, 12.7 mm |
| Bearing Material | 1014 Steel |
| Precision Ground | Yes |
| Operating Temperature [Min] | -22 ˚F |
| Bearing Design | Roller Clutch |
| Cage Material | Nylon |
| Rolling Element | Roller |
| Oil Hole | w/o Oil Hole |
| Operating Temperature [Max] | 230 ˚F |
| O.D. | 0.4375 in |
| Precision Class | ABEC 1 |
| Lubricant | Rust Preventative |
| Enclosure | Open |
| Tolerance | Iso Class 0 (RBEC 1) |
| Mounting Method | Press Fit |
| End Type | Open End |
| Weight | 0.008 LB |
| EAN or UPC | 605790205682 |
