- 0.75 in Inner Diameter
- 1 in Outer Diameter
- 0.63 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Lubricant | Rust Preventative |
| Housing Bore [Min] | 0.9995 in |
| Series | RC |
| Shaft Dia. [Max] | 0.75 in |
| Oil Hole | w/o Oil Hole |
| Mounting Method | Press Fit |
| Tolerance | Iso Class 0 (RBEC 1) |
| Housing Shoulder Diameter | 1.4 in |
| Housing Bore [Max] | 1.0005 in |
| End Type | Open End |
| Capacity | Standard Capacity |
| Operating Temperature [Max] | 230 ˚F |
| Cage Material | Polymer |
| Precision Ground | Yes |
| Shaft Dia. [Min] | 0.7495 in |
| Origin | Roller Clutches |
| Relubricatable | No |
| Radial Internal Clearance Specification | N/A |
| Speed (Max) Oil | 12000 rpm |
| Rolling Element | Roller |
| Outer Ring Width | 0.63 in, 15.88 mm |
| Operating Temperature [Min] | -22 ˚F |
| O.D. | 1 in, 25.41 mm |
| Overall Width | 0.63 in, 15.88 mm |
| Enclosure | Open |
| Clamp Torque | 196 lbf |
| Bearing Material | 1014 Steel |
| O.D. Type | Straight |
| Cage Type | Window |
| Radial Internal Clearance | N/A |
| I.D. | 0.75 in, 19.06 mm |
| Bearing Design | Roller Clutch |
| Bore Type | Round |
| Precision Class | ABEC 1 |
| No. of Rows | Single |
| Component | Assembly |
| Self Aligning | No |
| Relubrication Feature | No |
| Weight | 0.005 LB |
| EAN or UPC | 605790188510 |

