- 1 in Inner Diameter
- 1.31 in Outer Diameter
- 0.63 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Speed (Max) Oil | 8700 rpm |
| Series | RC |
| Oil Hole | w/o Oil Hole |
| Component | Assembly |
| Origin | Roller Clutches |
| Capacity | Standard Capacity |
| Self Aligning | No |
| Operating Temperature [Max] | 230 ˚F |
| Radial Internal Clearance | N/A |
| Bore Type | Round Bore, Inch Type |
| Housing Bore [Max] | 1.313 in |
| Clamp Torque | 412 lbf |
| Housing Shoulder Diameter | 1.9 in |
| End Type | Open End |
| Relubricatable | No |
| Precision Ground | Yes |
| Tolerance | Iso Class 0 (RBEC 1) |
| Cage Type | Window |
| Precision Class | ABEC 1 |
| I.D. | 1 in |
| Shaft Dia. [Min] | 0.9995 in |
| Outer Ring Width | 0.63 in, 15.88 mm |
| Housing Bore [Min] | 1.312 in |
| Bearing Material | 1014 Steel |
| No. of Rows | 1 |
| Bearing Design | Roller Clutch |
| O.D. | 1.3125 in |
| Rolling Element | Roller |
| Mounting Method | Press Fit |
| O.D. Type | Straight |
| Overall Width | 0.63 in, 15.88 mm |
| Radial Internal Clearance Specification | N/A |
| Cage Material | Nylon |
| Shaft Dia. [Max] | 1 in |
| Operating Temperature [Min] | -22 ˚F |
| Relubrication Feature | No |
| Enclosure | Open |
| Lubricant | Rust Preventative |
| Weight | 0.007 LB |
| EAN or UPC | 605790193101 |

