Find a Service Center
- 1 in Inner Diameter
- 1.31 in Outer Diameter
- 1.06 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Tolerance | Iso Class 0 (RBEC 1) |
| Lubricant | Rust Preventative |
| O.D. | 1.3125 in |
| Series | RCB |
| Dynamic Load Rating | 15.4 kN |
| Self Aligning | No |
| Housing Shoulder Diameter | 1.9 in |
| Mounting Method | Press Fit |
| Cage Material | Nylon |
| Overall Width | 1.06 in, 27 mm |
| Precision Class | ABEC 1 |
| Relubrication Feature | No |
| Bearing Material | 1014 Steel |
| Shaft Dia. [Max] | 1 in |
| End Type | Open End |
| Housing Bore [Max] | 1.313 in |
| Cage Type | Window |
| O.D. Type | Straight |
| Operating Temperature [Min] | -22 ˚F |
| Operating Temperature [Max] | 230 ˚F |
| Radial Internal Clearance | N/A |
| I.D. | 1 in |
| Precision Ground | Yes |
| Enclosure | Open |
| Rolling Element | Roller |
| No. of Rows | 3 |
| Working Load | 1890 lbf |
| Housing Bore [Min] | 1.312 in |
| Clamp Torque | 412 lbf |
| Bore Type | Round Bore, Inch Type |
| Relubricatable | No |
| Bearing Design | Roller Clutch |
| Oil Hole | w/o Oil Hole |
| Outer Ring Width | 1.06 in, 27 mm |
| Radial Internal Clearance Specification | N/A |
| Capacity | Standard Capacity |
| Speed (Max) Oil | 8700 rpm |
| Component | Assembly |
| Static Load Rating | 17.6 kN |
| Origin | Roller Clutches |
| Shaft Dia. [Min] | 0.9995 in |
| Weight | 0.002 LB |
| EAN or UPC | 605790201738 |
