Find a Service Center
Alternate Products
- 0.31 in Inner Diameter
- 1 in Outer Diameter
- 0.69 in Overall Width
- Double Shielded Enclosure
features
- Lubrication holes and lubrication groove in bore of inner ring provide relubrication when cross-drilled bolt or shaft is used
| Bearing Type | Needle Bearing |
| O.D. Type | Straight |
| Limiting Speed | 3000 rpm |
| Lubricant | Grease |
| Material | Steel |
| Outer Ring Width | 0.63 in, 15.88 mm |
| Inside Diameter Tolerance [Min] | 0.3121 in |
| Inner Ring Width | 0.69 in, 17.46 mm |
| Operating Temperature [Max] | 230 ˚F |
| Shaft Diameter - Press Fit [Min] | 0.3126 in |
| Speed (Max) Grease | 3000 rpm |
| Roller Type | Straight |
| Shaft Diameter - Slip Fit [Min] | 0.3118 in |
| Overall Width | 11/16 in |
| Precision Class | P0 |
| Bore Type | Round |
| Roller Width | 5/8 in |
| Shaft Diameter - Press Fit [Max] | 0.3130 in |
| Dynamic Capacity | 2840 lbf |
| Working Load | 2900 lbf |
| Operating Temperature [Min] | -22 ˚F |
| Overall Width Tolerance [Min] | 0.6775 in |
| Shaft Diameter - Slip Fit [Max] | 0.3122 in |
| Roller Dia. | 1 in |
| Overall Width Tolerance [Max] | 0.6925 in |
| Enclosure | Unsealed |
| Relubricatable | No |
| Component | Assembly |
| Self Aligning | No |
| I.D. | 5/16 in |
| Series | YCR |
| Inside Diameter Tolerance [Max] | 0.3127 in |
| Rolling Element | Needle Roller |
| Clamping Dia. | 0.594 in |
| O.D. | 1 in, 25.4 mm |
| Relubrication Feature | No |
| No. of Rows | Single |
| Inch/Metric | Inch |
| Weight | 0.17 LB |
| EAN or UPC | 605790189005 |
