Find a Service Center
Alternate Products
- 0.44 in Inner Diameter
- 1.5 in Outer Diameter
- 0.94 in Overall Width
- Double Shielded Enclosure
features
- Lubrication holes and lubrication groove in bore of inner ring provide relubrication when cross-drilled bolt or shaft is used
| Shaft Diameter - Press Fit [Min] | 0.4376 in |
| Rolling Element | Needle Roller |
| Outer Ring Width | 0.88 in, 22.23 mm |
| Operating Temperature [Max] | 230 ˚F |
| Shaft Diameter - Slip Fit [Min] | 0.4368 in |
| I.D. | 7/16 in |
| O.D. Type | Straight |
| Dynamic Capacity | 5570 lbf |
| Relubrication Feature | No |
| Roller Type | Straight |
| Enclosure | Unsealed |
| No. of Rows | Single |
| Operating Temperature [Min] | -22 ˚F |
| Component | Assembly |
| Limiting Speed | 2100 rpm |
| Working Load | 5800 lbf |
| Inner Ring Width | 0.94 in, 23.81 mm |
| Bore Type | Round |
| Shaft Diameter - Press Fit [Max] | 0.4380 in |
| Inside Diameter Tolerance [Min] | 0.4371 in |
| Bearing Type | Needle Bearing |
| Material | Steel |
| Overall Width Tolerance [Max] | 0.9430 in |
| Speed (Max) Grease | 2300 rpm |
| Inch/Metric | Inch |
| Self Aligning | No |
| Clamping Dia. | 0.891 in |
| Roller Width | 7/8 in |
| Roller Dia. | 1 1/2 in |
| Overall Width Tolerance [Min] | 0.9280 in |
| Relubricatable | No |
| Inside Diameter Tolerance [Max] | 0.4377 in |
| O.D. | 1.5 in, 38.1 mm |
| Series | YCR |
| Lubricant | Grease |
| Overall Width | 15/16 in |
| Shaft Diameter - Slip Fit [Max] | 0.4372 in |
| Precision Class | P0 |
| Weight | 0.434 LB |
| EAN or UPC | 605790189012 |
