Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 12 Number of Teeth
- 1.402 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Min] | 3/8 in |
| Hub Type | B |
| Length Through Bore | 1 1/2 in |
| Hub Projection | 0.438 in |
| Hub Dia. | 1.062 in |
| Bore Range [Max] | 13/16 in |
| Hardened Teeth | Without Hardened Teeth |
| No. of Screws | 1 |
| Bushing Series | N/A |
| Outside Dia. | 1.4020 in |
| Type | PB |
| Bushing Type | None |
| Bore Type | Bushed |
| Belt Width | 3/4 in |
| Belt Size | L |
| Pitch Diameter | 1.432 in |
| No. of Teeth | 12 |
| Material | Steel |
| Set Screw Size | 10-24 x 3/16 |
| Finished Bore | N/A |
| Belt Pitch | 3/8 in |
| Weight | 1.0 LB |
| EAN or UPC | 697950093505 |
