Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 14 Number of Teeth
- 2.174 in Outside Diameter
- H100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Pitch Diameter | 2.228 in |
| Belt Width | 1 in |
| Type | PB |
| Belt Size | H |
| Material | Steel |
| Belt Pitch | 1/2 in |
| Bore Range [Max] | 1 in |
| Hardened Teeth | With Hardened Teeth |
| Bore Type | Reborable |
| Bore Range [Min] | 5/8 in |
| Outside Dia. | 2.1740 in |
| Length Through Bore | 1.937 in |
| Finished Bore | N/A |
| Bushing Series | N/A |
| Hub Type | B |
| Bushing Type | None |
| Hub Projection | 5/8 in |
| Hub Dia. | 1 1/2 in |
| No. of Teeth | 14 |
| Weight | 1.4 LB |
| EAN or UPC | 697950150918 |
