Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 15 Number of Teeth
- 1.76 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Type | Reborable |
| Hub Type | B |
| Outside Dia. | 1.76 in |
| Length Through Bore | 1.25 in |
| Hub Dia. | 1 1/4 in |
| No. of Teeth | 15 |
| Bore Range [Min] | 0.5 in |
| Bushing Series | N/A |
| Pitch Diameter | 1.79 in |
| Bore Range [Max] | 0.937 in |
| Belt Width | 0.5 in |
| Material | Steel |
| Finished Bore | N/A |
| Hub Projection | 1/2 in |
| Bushing Type | None |
| Hardened Teeth | Without Hardened Teeth |
| Type | PB |
| Belt Pitch | 0.375 in |
| Belt Size | L050 |
| Weight | 0.5 LB |
| EAN or UPC | 697950150963 |
