Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 16 Number of Teeth
- 1.88 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Steel |
| Finished Bore | N/A |
| Bushing Series | N/A |
| Hardened Teeth | Without Hardened Teeth |
| Bore Range [Max] | 1.125 in |
| Belt Size | L050 |
| Length Through Bore | 1.375 in |
| Pitch Diameter | 1.91 in |
| Outside Dia. | 1.88 in |
| No. of Screws | 1 |
| Type | PB |
| Belt Pitch | 0.375 in |
| Belt Width | 0.5 in |
| Hub Projection | 5/8 in |
| Hub Type | B |
| Set Screw Size | 1/4-20 x 1/4 |
| Bore Type | Bushed |
| Bushing Type | None |
| Hub Dia. | 1.437 in |
| No. of Teeth | 16 |
| Bore Range [Min] | 0.5 in |
| Weight | 0.6 LB |
| EAN or UPC | 697950101002 |
