Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 16 Number of Teeth
- 1.88 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Type | Bushed |
| Belt Size | L075 |
| No. of Screws | 1 |
| Length Through Bore | 1.625 in |
| Bore Range [Min] | 0.5 in |
| Hub Projection | 5/8 in |
| Material | Steel |
| No. of Teeth | 16 |
| Set Screw Size | 1/4-20 x 1/4 |
| Type | PB |
| Belt Width | 0.75 in |
| Finished Bore | N/A |
| Bore Range [Max] | 1.125 in |
| Hub Type | B |
| Bushing Series | N/A |
| Belt Pitch | 0.375 in |
| Outside Dia. | 1.88 in |
| Hub Dia. | 1.437 in |
| Pitch Diameter | 1.91 in |
| Bushing Type | None |
| Hardened Teeth | Without Hardened Teeth |
| Weight | 1.0 LB |
| EAN or UPC | 697950101019 |
