Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 17 Number of Teeth
- 1.999 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Steel |
| Bore Range [Min] | 0.5 in |
| Belt Size | L100 |
| Belt Width | 1 in |
| Bushing Type | None |
| Pitch Diameter | 2.029 in |
| Hub Projection | 5/8 in |
| Hardened Teeth | Without Hardened Teeth |
| Belt Pitch | 0.375 in |
| Bore Range [Max] | 1.125 in |
| Finished Bore | N/A |
| Bushing Series | N/A |
| Hub Type | B |
| No. of Teeth | 17 |
| Bore Type | Reborable |
| Type | PB |
| Length Through Bore | 1.875 in |
| Hub Dia. | 1.437 in |
| Outside Dia. | 1.999 in |
| Weight | 1.0 LB |
| EAN or UPC | 697950151045 |
