Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 18 Number of Teeth
- 2.811 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | N/A |
| Bore Range [Min] | 3/4 in |
| Finished Bore | N/A |
| Length Through Bore | 2.562 in |
| Hub Dia. | 2 1/4 in |
| Bore Range [Max] | 1 1/2 in |
| Bore Type | Reborable |
| Bushing Type | None |
| Hardened Teeth | With Hardened Teeth |
| Belt Width | 1 1/2 in |
| Material | Steel |
| Outside Dia. | 2.8110 in |
| Hub Type | B |
| Belt Size | H |
| No. of Teeth | 18 |
| Pitch Diameter | 2.865 in |
| Type | DF-1 |
| Belt Pitch | 1/2 in |
| Hub Projection | 3/4 in |
| Weight | 3.3 LB |
| EAN or UPC | 697950151076 |
