Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 20 Number of Teeth
- 3.129 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 20 |
| Hub Dia. | 2 1/2 in |
| Hub Type | B |
| Hardened Teeth | With Hardened Teeth |
| Type | DF-1 |
| Bushing Type | None |
| Bore Type | Reborable |
| Length Through Bore | 2.687 in |
| Bore Range [Max] | 1 5/8 in |
| Bushing Series | N/A |
| Hub Projection | 7/8 in |
| Bore Range [Min] | 3/4 in |
| Belt Width | 1 1/2 in |
| Belt Size | H |
| Outside Dia. | 3.1290 in |
| Finished Bore | N/A |
| Material | Steel |
| Belt Pitch | 1/2 in |
| Pitch Diameter | 3.183 in |
| Weight | 4.3 LB |
| EAN or UPC | 697950151236 |
