Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 20 Number of Teeth
- 2.357 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | L |
| Bore Range [Max] | 1 1/4 in |
| Hub Projection | 5/8 in |
| Pitch Diameter | 2.387 in |
| Material | Steel |
| Belt Width | 1/2 in |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1 3/8 in |
| Type | PB |
| Finished Bore | N/A |
| Bushing Series | N/A |
| Bore Type | Reborable |
| Bushing Type | None |
| Hub Dia. | 1.687 in |
| Bore Range [Min] | 1/2 in |
| Belt Pitch | 3/8 in |
| No. of Teeth | 20 |
| Outside Dia. | 2.3570 in |
| Hub Type | B |
| Weight | 0.94 LB |
| EAN or UPC | 697950151274 |
