Find a Service Center
- 0.875 in Belt Pitch
- 2 in Belt Width
- 20 Number of Teeth
- 5.462 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 3.25 in |
| Belt Pitch | 0.875 in |
| Material | Steel |
| No. of Teeth | 20 |
| Bushing Series | N/A |
| Finished Bore | N/A |
| Belt Size | XH |
| Bushing Type | None |
| Outside Dia. | 5.462 in |
| Belt Width | 2 in |
| Type | DF |
| Bore Type | Reborable |
| Bore Range [Min] | 1 in |
| Length Through Bore | 3.568 in |
| Hub Dia. | 4 1/8 in |
| Hub Projection | 1 in |
| Hub Type | B |
| Pitch Diameter | 5.57 in |
| Hardened Teeth | With Hardened Teeth |
| Weight | 16.0 LB |
| EAN or UPC | 697950109794 |
