Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 21 Number of Teeth
- 2.521 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Finished Bore | N/A |
| Hardened Teeth | Without Hardened Teeth |
| No. of Teeth | 21 |
| Hub Dia. | 1 7/8 in |
| Bore Type | Reborable |
| Material | Steel |
| Belt Width | 1 in |
| Hub Projection | 0.688 in |
| Hub Type | B |
| Type | PB |
| Outside Dia. | 2.521 in |
| Bore Range [Max] | 1.312 in |
| Belt Pitch | 0.375 in |
| Bore Range [Min] | 0.625 in |
| Bushing Series | N/A |
| Pitch Diameter | 2.507 in |
| Belt Size | L100 |
| Bushing Type | None |
| Length Through Bore | 1.875 in |
| Weight | 1.8 LB |
| EAN or UPC | 697950151366 |
