Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 22 Number of Teeth
- 3.447 in Outside Diameter
- H100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 1.875 in |
| Bushing Type | None |
| Hardened Teeth | With Hardened Teeth |
| Outside Dia. | 3.447 in |
| Bore Type | Reborable |
| Finished Bore | N/A |
| Material | Steel |
| Hub Projection | 1 in |
| Type | DF-1 |
| Belt Size | H100 |
| Hub Dia. | 2 7/8 in |
| Length Through Bore | 2.312 in |
| Hub Type | B |
| Bore Range [Min] | 0.75 in |
| Bushing Series | N/A |
| Belt Width | 1 in |
| Belt Pitch | 0.5 in |
| Pitch Diameter | 3.501 in |
| No. of Teeth | 22 |
| Weight | 4.3 LB |
| EAN or UPC | 697950151373 |
