Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 24 Number of Teeth
- 3.766 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | H |
| Type | DF-1 |
| Belt Pitch | 1/2 in |
| Bore Range [Min] | 3/4 in |
| Belt Width | 1 1/2 in |
| Finished Bore | N/A |
| Hub Type | B |
| Bushing Series | N/A |
| Length Through Bore | 2.812 in |
| Bore Range [Max] | 2 1/8 in |
| Hub Projection | 1 in |
| Outside Dia. | 3.7660 in |
| Hardened Teeth | With Hardened Teeth |
| Hub Dia. | 3 1/8 in |
| No. of Teeth | 24 |
| Bushing Type | None |
| Pitch Diameter | 3.820 in |
| Material | Steel |
| Bore Type | Reborable |
| Weight | 6.5 LB |
| EAN or UPC | 697950151526 |
