Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 26 Number of Teeth
- 4.086 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 2.5 in |
| Length Through Bore | 2.437 in |
| Finished Bore | N/A |
| Bore Range [Min] | 0.75 in |
| Bore Type | Reborable |
| Hub Type | B |
| Type | DF |
| No. of Teeth | 26 |
| Bushing Type | None |
| Material | Steel |
| Outside Dia. | 4.086 in |
| Hub Projection | 1 1/8 in |
| Pitch Diameter | 4.138 in |
| Belt Pitch | 0.5 in |
| Hardened Teeth | With Hardened Teeth |
| Bushing Series | N/A |
| Hub Dia. | 3 1/2 in |
| Belt Size | H |
| Belt Width | 1 in |
| Weight | 6.7 LB |
| EAN or UPC | 697950151632 |
