Find a Service Center
- 0.375 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 30 Number of Teeth
- 1.89 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 1.8900 in |
| Bushing Type | None |
| Hardened Teeth | Without Hardened Teeth |
| Bore Type | Bushed |
| Bore Range [Min] | 5/16 in |
| Bushing Series | N/A |
| Hub Dia. | 1 3/8 in |
| Hub Type | B |
| Finished Bore | N/A |
| Length Through Bore | 0.940 in |
| Type | DF-1 |
| Bore Range [Max] | 1 1/16 in |
| Material | Steel |
| Hub Projection | 0.218 in |
| Belt Pitch | 0.200 in |
| No. of Teeth | 30 |
| No. of Screws | 2 |
| Set Screw Size | 8-32 x 1/8 |
| Belt Width | 1/4 in, 3/8 in |
| Belt Size | XL |
| Pitch Diameter | 1.910 in |
| Weight | 0.41 LB |
| EAN or UPC | 697950114316 |
