Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 72 Number of Teeth
- 8.567 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | Quick Disconnect |
| No. of Teeth | 72 |
| Hub Type | C |
| Type | G |
| Belt Pitch | 0.375 in |
| Belt Width | 0.5 in |
| Hub Projection | 1/4 in |
| Belt Size | L |
| Length Through Bore | 1.25 in |
| Bore Type | Bushed |
| Outside Dia. | 8.567 in |
| Bushing Series | SD |
| Pitch Diameter | 8.594 in |
| Bore Range [Max] | 2 in |
| Bore Range [Min] | 0.5 in |
| Hardened Teeth | Without Hardened Teeth |
| Material | Cast Iron |
| Hub Dia. | 3 3/8 in |
| Finished Bore | N/A |
| Weight | 6.0 LB |
| EAN or UPC | 697950122892 |
