Skip to content Skip to navigation menu
MartinHMK525

HMK525

Miter Gear
Item #100811512
  • 20° Pressure Angle
  • 25 Teeth
  • 5 Diametral Pitch
  • 1.115 in Face Width
  • 5 in Pitch Diameter
  • Bored to Size
  • 1.375 in Finished Bore
  • 1.375 in Minimum Bore Size
+ Show More + Show Less
MartinHMK525
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 20° Pressure Angle
  • 25 Teeth
  • 5 Diametral Pitch
  • 1.115 in Face Width
  • 5 in Pitch Diameter

description

  • All standard stock miter gears must be mounted at right angles (90°) for proper tooth bearings.

features

  • All Martin Gears are cut with the 20° pressure angle system
  • Hardened miter gears have approximately 50% more horsepower capacity and provide greater gear wear than untreated gears
  • The mounting distance must be held in order to maintain proper bachlash between gears. The use of a straight mineral oil as a lubricant is recommended for most miter gear applications
  • All Martin Miter Gears are cut with the 20° pressure angle system.
  • The use of a straight mineral oil as a lubricant is recommended for most Miter Gear applications.
Pressure Angle 20 °
Ratio 1:1
Set Screw 1
Keyway 5/16 x 5/32
Mounting Distance 4.63 in
Bore Size 1.375 in
Finished Bore 1 3/8 in
Length Through Bore 3 in
Set Screw Size 3/8-16 x 3/8
Hub Projection 1 3/4 in
No. of Teeth 25
Hub O.D. 3 1/2 in
Material Steel
Set Screw Location Over Keyway
Pitch Diameter 5 in
Spiral Direction Straight
Inch/Metric Inch
Outside Dia. 5.283 in
Bore Type Bored to Size
Hardened Teeth With Hardened Teeth
Diametral Pitch 5
Weight 8.52 LB
EAN or UPC 697950051475
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison