Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 32 Number of Teeth
- 5.039 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Width Across Teeth | 1.563 in |
| Belt Pitch | 0.5 in |
| Belt Width | 1.5 in |
| Length Through Bore | 1.813 in |
| Outside Dia. | 5.039 in |
| No. of Teeth | 32 |
| Pitch Diameter | 5.093 in |
| Bushing Type | Taper-Lock |
| Finished Bore | N/A |
| Belt Size | H |
| Bore Type | Bushed |
| Type | KF |
| Bore Range [Max] | 2.5 in |
| Bushing Series | 2517 |
| Material | Cast Iron |
| Hub Type | A |
| Bore Range [Min] | 0.5 in |
| Weight | 6.01 LB |
| EAN or UPC | 697950083766 |
