Find a Service Center
- 0.38 in Belt Pitch
- 1 in Belt Width
- 32 Number of Teeth
- 3.79 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Finished Bore | N/A |
| Hub Type | B |
| Type | KF-1 |
| Bore Range [Max] | 1.625 in |
| Pitch Diameter | 3.82 in |
| Belt Width | 1 in |
| Outside Dia. | 3.79 in |
| Bore Type | Bushed |
| Hub Projection | 1/4 in |
| Hub Dia. | 3.062 in |
| Material | Steel |
| Bore Range [Min] | 0.5 in |
| No. of Teeth | 32 |
| Length Through Bore | 1 in |
| Belt Pitch | 0.38 in |
| Bushing Type | Taper-Lock |
| Bushing Series | 1610 |
| Belt Size | L |
| Width Across Teeth | 0.563 in |
| Weight | 1.9 LB |
| EAN or UPC | 697950083797 |
