Find a Service Center
- 0.875 in Belt Pitch
- 2 in Belt Width
- 32 Number of Teeth
- 8.803 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | 3535 |
| Hub Dia. | 6 1/2 in |
| Type | CF |
| Belt Pitch | 0.875 in |
| Belt Width | 2 in |
| Bore Range [Min] | 1.1875 in |
| Bushing Type | Taper-Lock |
| No. of Teeth | 32 |
| Outside Dia. | 8.803 in |
| Hub Type | B |
| Material | Cast Iron |
| Finished Bore | N/A |
| Bore Type | Bushed |
| Hub Projection | 1 in |
| Width Across Teeth | 2.25 in |
| Belt Size | XH |
| Pitch Diameter | 8.913 in |
| Length Through Bore | 3.5 in |
| Bore Range [Max] | 3.5 in |
| Weight | 32.0 LB |
| EAN or UPC | 697950083827 |
