Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 40 Number of Teeth
- 6.312 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Cast Iron |
| Belt Size | H |
| Pitch Diameter | 6.366 in |
| No. of Teeth | 40 |
| Hub Projection | 0.188 in |
| Hub Type | B |
| Bore Range [Max] | 2.5 in |
| Bushing Type | Taper-Lock |
| Type | CF |
| Bore Range [Min] | 0.5 in |
| Width Across Teeth | 1.063 in |
| Bushing Series | 2517 |
| Outside Dia. | 6.312 in |
| Length Through Bore | 1.75 in |
| Belt Pitch | 0.5 in |
| Hub Dia. | 4.437 in |
| Finished Bore | N/A |
| Belt Width | 1 in |
| Bore Type | Bushed |
| Weight | 7.8 LB |
| EAN or UPC | 697950083841 |
