Find a Service Center
- 0.5 in Belt Pitch
- 2 in Belt Width
- 60 Number of Teeth
- 9.495 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | 3020 |
| Bore Type | Bushed |
| Belt Width | 2 in |
| Outside Dia. | 9.495 in |
| No. of Teeth | 60 |
| Bore Range [Min] | 0.875 in |
| Material | Cast Iron |
| Type | A |
| Belt Size | H |
| Bushing Type | Taper-Lock |
| Bore Range [Max] | 3 in |
| Pitch Diameter | 9.549 in |
| Length Through Bore | 2 in |
| Width Across Teeth | 2.343 in |
| Finished Bore | N/A |
| Belt Pitch | 0.5 in |
| Hub Type | A |
| Weight | 15.3 LB |
| EAN or UPC | 697950084046 |
