Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 60 Number of Teeth
- 7.132 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | L |
| Finished Bore | N/A |
| Hub Type | C |
| No. of Teeth | 60 |
| Bushing Series | 2012 |
| Hub Projection | 1/4 in |
| Belt Pitch | 0.375 in |
| Outside Dia. | 7.132 in |
| Type | C |
| Width Across Teeth | 0.75 in |
| Hub Dia. | 4 3/8 in |
| Material | Cast Iron |
| Pitch Diameter | 7.162 in |
| Bore Range [Max] | 2 in |
| Bore Type | Bushed |
| Length Through Bore | 1.25 in |
| Bore Range [Min] | 0.5 in |
| Bushing Type | Taper-Lock |
| Belt Width | 0.5 in |
| Weight | 7.49 LB |
| EAN or UPC | 697950084060 |
