Find a Service Center
- 0.875 in Belt Pitch
- 2 in Belt Width
- 60 Number of Teeth
- 16.601 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 16.601 in |
| Width Across Teeth | 2.563 in |
| Bore Range [Min] | 1.4375 in |
| Bushing Series | 4040 |
| No. of Teeth | 60 |
| Length Through Bore | 4 in |
| Belt Pitch | 0.875 in |
| Belt Size | XH |
| Bore Type | Bushed |
| Material | Cast Iron |
| Belt Width | 2 in |
| Hub Type | C |
| Pitch Diameter | 16.711 in |
| Bore Range [Max] | 4 in |
| Hub Dia. | 8 1/2 in |
| Hub Projection | 0.719 in |
| Bushing Type | Taper-Lock |
| Finished Bore | N/A |
| Type | C |
| Weight | 75.0 LB |
| EAN or UPC | 697950084091 |
