Find a Service Center
- 30.0000 mm Bore
- Air Actuated, Spring Released
- Pilot Mount Drive Arangement
- 6.0 bar Max Pressure
- 1,350 rpm Max
features
- Straight bore
- Metric air engaged
- Positional reengagement torque is approximately 10% of clutch torque being generated based on applied air pressure
- Positive engagement for accurate position and registration
- Sealed, radial ball bearings
- Through-shaft mounting design uses full-length keyway
- Accurate timing between two shafts
- Enclosed design
- Instantaneous torque up to 1,300 Nm
- Maximum operating speed up to 1,650 rpm
- Metric
- Operates in wet or dry environment
- Pilot-mount design with tapped mounting holes
- Ability to mount pulley, sprocket or gear on clutch
includes
- 222 mm hose
compliances
- 0
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Model | 5H40P#P-E |
| Minimum Static Clutch Torque | 102 N-m |
| Bore Style | Straight |
| No. Of Engagement Positions | 1 @ 360° |
| Drive Inertia | 66.43 kg cm2 |
| Manufacturer Family | Model 5H40P#P-E Totally Enclosed Positioning Tooth Clutch |
| Inch/Metric | Metric |
| Open Or Enclosed Design | Enclosed |
| Port or Hose Size | 0.250 BSPT |
| Clutch Air Chamber Volume When New | 26.301 cc |
| Maximum Static Clutch Torque | 440 N-m |
| Finish | Nickel Plated |
| Minimum Engagement Pressure | 1.4 bar |
| Product Category | Metric Sizes |
| Maximum Pressure | 6 bar |
| Minimum Sprocket Size | 35/45T, 40/34T, 50/28T, 60/24T, 80/18T |
| Kits | 913029 |
| Actuation/Return | Air/Spring |
| Drive Arrangement | Pilot Mount |
| Family Name | Pilot Mount Positioning Enclosed |
| Main Category | Tooth Clutches |
| Photo | 5HPEnclosed |
| Weight | 21.0 LB |
| EAN or UPC | 662284209199 |
