6206DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761066

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Capacity	Standard Capacity
No. in Set	Single Bearing
Precision	Standard
Width	16 mm
I.D.	30 mm
Radial Internal Clearance	C3
Seal Type	Contact Seals
Limiting Speed - Oil	13000 rpm
Outer Ring Width	16 mm
Static Load Rating [Max]	2,540.00 lbf
Corner Radius [Min]	1.00 mm
Contact Angle	0°
Inch/Metric	Metric Bore
Limiting Speed - Grease	7500 rpm
Dynamic Load Rating	4,384.00 lbf
Material	Steel
O.D.	62.0000 mm
O.D. Type	Straight
Enclosure	Double Sealed
Seal Material	Buna-N
Rows of Balls	Single
Precision Level	Standard (ABEC 1)
Bore Type	Round Bore
Cage Material	Pressed Steel
Bearing Type	Radial
Lubricant	Mul-Temp SRL
Ball Material	Steel
Radial Internal Clearance Specification	Greater Than Normal Clearance
Cage Type	Metal
Inner Ring Width	16 mm
Preload Level	None
icNumber	7695849
Snap Ring	No Snap Ring
Locking Device	No Locking Device
Weight	0.43 LB
EAN or UPC	29176064289