6206ZZC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761064

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Precision	Standard
O.D. Type	Straight
Cage Type	Metal
No. in Set	Single Bearing
Limiting Speed - Grease	11000 rpm
Material	Steel
Width	16 mm
Seal Type	Non-Contact Seals
Limiting Speed - Oil	13000 rpm
Corner Radius [Min]	1.00 mm
O.D.	62.0000 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Preload Level	None
Bore Type	Round Bore
Inner Ring Width	16 mm
Precision Level	Standard (ABEC 1)
icNumber	7695954
Snap Ring	No Snap Ring
Static Load Rating [Max]	2,540.00 lbf
Inch/Metric	Metric Bore
Radial Internal Clearance	C3
Lubricant	Mul-Temp SRL
Enclosure	Double Shielded
Outer Ring Width	16 mm
Dynamic Load Rating	4,384.00 lbf
Seal Material	Metal
Ball Material	Steel
Capacity	Standard Capacity
Locking Device	No Locking Device
Bearing Type	Radial
Cage Material	Pressed Steel
Rows of Balls	Single
I.D.	30 mm
Contact Angle	0°
Weight	0.443 LB
EAN or UPC	29176014574