6210C3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761323

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Static Load Rating [Max]	5,220.00 lbf
Width	20 mm
Seal Type	Unsealed
Radial Internal Clearance	C3
Locking Device	No Locking Device
Lubricant	Mul-Temp SRL
Corner Radius [Min]	1.10 mm
Inner Ring Width	20 mm
Seal Material	None
Contact Angle	0°
No. in Set	Single Bearing
Snap Ring	No Snap Ring
Ball Material	Steel
Preload Level	None
Cage Material	Pressed Steel
icNumber	7696077
Precision Level	Standard (ABEC 1)
Radial Internal Clearance Specification	Greater Than Normal Clearance
Inch/Metric	Metric Bore
I.D.	50 mm
Bore Type	Round Bore
Limiting Speed - Oil	8500 rpm
O.D. Type	Straight
Outer Ring Width	20 mm
Dynamic Load Rating	8,262.00 lbf
O.D.	90.0000 mm
Bearing Type	Radial
Rows of Balls	Single
Cage Type	Metal
Limiting Speed - Grease	7100 rpm
Capacity	Standard Capacity
Precision	Standard
Material	Steel
Enclosure	Open
Weight	1.021 LB
EAN or UPC	29176015014