6213

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761493

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

I.D.	65 mm
Contact Angle	0°
Rows of Balls	Single
icNumber	7699314
Cage Material	Pressed Steel
Radial Internal Clearance	Normal
Inch/Metric	Metric Bore
Cage Type	Metal
Preload Level	None
O.D.	120.0000 mm
Lubricant	Oil Preservative
No. in Set	Single Bearing
Limiting Speed - Grease	5300 rpm
Material	Steel
Ball Material	Steel
Bearing Type	Radial
Locking Device	No Locking Device
Radial Internal Clearance Specification	Normal Clearance
Snap Ring	No Snap Ring
Precision Level	Standard (ABEC 1)
Capacity	Standard Capacity
Seal Material	None
O.D. Type	Straight
Bore Type	Round Bore
Dynamic Load Rating	13,573.00 lbf
Limiting Speed - Oil	6300 rpm
Precision	Standard
Corner Radius [Min]	1.50 mm
Seal Type	Unsealed
Enclosure	Open
Width	23 mm
Inner Ring Width	23 mm
Outer Ring Width	23 mm
Static Load Rating [Max]	9,010.00 lbf
Weight	2.293 LB
EAN or UPC	29176015274