6214DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761551

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Outer Ring Width	24 mm
Dynamic Load Rating	13,938.00 lbf
Limiting Speed - Oil	6300 rpm
Material	Steel
Locking Device	No Locking Device
Enclosure	Double Sealed
Inch/Metric	Metric Bore
O.D. Type	Straight
O.D.	125.0000 mm
icNumber	7696126
Seal Type	Contact Seals
Radial Internal Clearance	C3
Width	24 mm
Lubricant	Mul-Temp SRL
Preload Level	None
Static Load Rating [Max]	9,892.00 lbf
Snap Ring	No Snap Ring
Cage Material	Pressed Steel
No. in Set	Single Bearing
Precision	Standard
Ball Material	Steel
Limiting Speed - Grease	3400 rpm
I.D.	70 mm
Corner Radius [Min]	1.50 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Rows of Balls	Single
Cage Type	Metal
Inner Ring Width	24 mm
Seal Material	Buna-N
Precision Level	Standard (ABEC 1)
Bearing Type	Radial
Capacity	Standard Capacity
Contact Angle	0°
Bore Type	Round Bore
Weight	2.205 LB
EAN or UPC	29176064685