6215DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761583

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Seal Material	Buna-N
Width	25 mm
Contact Angle	0°
Seal Type	Contact Seals
Bore Type	Round Bore
Inner Ring Width	25 mm
Lubricant	Mul-Temp SRL
Bearing Type	Radial
icNumber	7695967
I.D.	75 mm
Cage Material	Pressed Steel
O.D. Type	Straight
No. in Set	Single Bearing
Cage Type	Metal
Ball Material	Steel
Precision Level	Standard (ABEC 1)
Dynamic Load Rating	14,837.00 lbf
O.D.	130.0000 mm
Rows of Balls	Single
Preload Level	None
Capacity	Standard Capacity
Radial Internal Clearance Specification	Greater Than Normal Clearance
Limiting Speed - Grease	3200 rpm
Locking Device	No Locking Device
Enclosure	Double Sealed
Outer Ring Width	25 mm
Corner Radius [Min]	1.50 mm
Inch/Metric	Metric Bore
Precision	Standard
Static Load Rating [Max]	11,128.00 lbf
Snap Ring	No Snap Ring
Radial Internal Clearance	C3
Limiting Speed - Oil	5600 rpm
Material	Steel
Weight	2.601 LB
EAN or UPC	29176064715