6218ZZC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761663

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

No. in Set	Single Bearing
Dynamic Load Rating	22,661.00 lbf
Seal Type	Non-Contact Seals
Radial Internal Clearance	C3
Cage Type	Metal
Inner Ring Width	30 mm
Cage Material	Pressed Steel
Precision Level	Standard (ABEC 1)
Outer Ring Width	30 mm
O.D. Type	Straight
Seal Material	Metal
Locking Device	No Locking Device
Limiting Speed - Grease	4000 rpm
Width	30 mm
Preload Level	None
Contact Angle	0°
Lubricant	Mul-Temp SRL
Static Load Rating [Max]	16,100.00 lbf
Snap Ring	No Snap Ring
I.D.	90 mm
Enclosure	Double Shielded
Bearing Type	Radial
Inch/Metric	Metric Bore
Bore Type	Round Bore
Capacity	Standard Capacity
icNumber	7696023
Material	Steel
Precision	Standard
Ball Material	Steel
Radial Internal Clearance Specification	Greater Than Normal Clearance
Rows of Balls	Single
Limiting Speed - Oil	4800 rpm
O.D.	160.0000 mm
Corner Radius [Min]	2.00 mm
Weight	4.806 LB
EAN or UPC	29176015762