6304

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100760967

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Enclosure	Open
Ball Material	Steel
Radial Internal Clearance Specification	Normal Clearance
Limiting Speed - Grease	14000 rpm
O.D. Type	Straight
Corner Radius [Min]	1.10 mm
Bearing Type	Radial
Limiting Speed - Oil	17000 rpm
icNumber	7699302
Cage Type	Metal
Snap Ring	No Snap Ring
I.D.	20 mm
Bore Type	Round Bore
Precision	Standard
Dynamic Load Rating	3,580.00 lbf
Seal Type	Unsealed
O.D.	52.0000 mm
Width	15 mm
Capacity	Standard Capacity
Material	Steel
Preload Level	None
Rows of Balls	Single
Static Load Rating [Max]	1,770.00 lbf
Locking Device	No Locking Device
Inch/Metric	Metric Bore
Precision Level	Standard (ABEC 1)
No. in Set	Single Bearing
Contact Angle	0°
Outer Ring Width	15 mm
Lubricant	Oil Preservative
Radial Internal Clearance	Normal
Cage Material	Pressed Steel
Seal Material	None
Inner Ring Width	15 mm
Weight	0.317 LB
EAN or UPC	29176016486